My Latest Ink Blended Card

I haven’t made anything for several days, and I can always tell when it’s time to create.  So, I pulled out some newly purchased stamps from Lil’ Inker Designs (I just love their stuff), and went to work.

Distress Ink Blended Thank You Card by My Empty Nest CreationsOf course, I started with my favorite card size, A2 4.25″ x 5.5″, made from Neenah Solar White 110# card stock.  I then cut another 4.25″ x 5.5″ piece of white card stock for my ink blending and embossing layer.  First, I white heat embossed the floral images from Lil’ Inker’s Inky Flowers stamp set.  I knew that I wanted the flowers to be on a good portion of the card, so I had to do this in multiple steps because of the size of the images.  Then, I set to work on my ink blending.  I used both Blueprint Sketch and Wilted Violet Distress Inks.  After I was done ink blending, I gently rubbed a baby wipe across the floral images to remove any ink that may have landed on the white embossed areas.  To finish the base layer, I sprayed a light water mist over the top.  (I just love to watch Distress Inks react with water.)  For one last detail, I spritzed my Tsukineko Shimmer Spritz over the enter surface to give it a little sparkle.  In order to do something a little different than just adhering this whole piece on the card base, I decided to cut it up in a few pieces.  After I cut them, I felt that they needed a little something to help define the edges a bit, so I used my ink blending tool and gave the edges another layer of ink.  I arranged the pieces so that there was a slight gap between them when I adhered them with dimensional adhesive.  That left just the greeting.  I thought that a silver embossed greeting would blend perfectly with the Distress Ink colors that I chose.  I cut a thank you greeting from Heidi Swapp’s thank you die and cut it in half so that I had a two word greeting.  I silver heat embossed it with Zing Silver Metallic embossing powder.  I just love how embossing a die cut gives it so much dimension.  To finish it off, I glued the greeting on the top with some liquid glue.

I hope you like it!

CAS(E) this Sketch #205

Another one of my favorite card sketch challenge sites is CAS(E) this Sketch.  Their sketches always challenge me to try and think outside the box (which is a pretty difficult thing for me).

Here is their latest sketch…

cts_205

and here’s what I came up with…

1_22_17-case-this-sketch-love-card-img_0822

Enter a caption

I started off with my favorite size card base–A2 4.25″ x 5.5″ made from kraft card stock.  I then cut my patterned paper from 2 different 6×6 My Mind’s Eye paper pads by eyeballing it.  I have to get better at being more precise when it comes to cutting paper 🙂

Using the Pierced Heart Stax dies from My Favorite Things, I cut the hearts out of the top kraft layer, the blue layer and the yellow layer, leaving the red layer alone.  I adhered all of the layers so that the hearts lined up.

After seeing it all put together, I thought it looked a little dull, so I added the black strips along the outside cut edge because I knew that my greeting was going to be black.  I triple cut the love greeting from the Simon Says Stamp Love die set and glued them together to give a little dimension to the greeting.  Even after that, it still looked a little plain, so I pulled out my newly acquired black Nuvo drops and added those above the heart and below the greeting.  I also added the small kraft heart in the center from the Pierced Heart Stax smallest die.

I hope you like it!

 

CAS(E) Sketch #197

I’m so happy that I’ve gotten involved in a few card sketch challenges.  It has really sparked my creative juices.

Here’s the latest sketch from the CAS(E) This Sketch Challenge

cts_197I have to admit, I struggled with this sketch initially.  It took a couple of “trial and error” cards to figure out what I really wanted to do.  I think where I kept getting stuck was the uphill slant on the design.

 

 

 

Here’s what I decided on…

11_8_16-homes-on-hill-holiday-card-img_0628I started with an A2 white card stock base.  I roughly masked off the bottom portion and stamped the Hero Arts Tiny Star background stamp with Versamark ink.  I heat embossed with Recollections gold embossing powder.  Then I did some ink blending for the sky using Chipped Sapphire and Blueprint Sketch Distress Inks.  I was careful to be light handed near the bottom portion to give the idea of a slight glow from the lighted windows.  I then die cut the houses using the Tim Holtz Townscape On the Edge die.  I cut the houses apart and backed 5 of them with light yellow card stock.  I glued them on the diagonal to represent a hill and then covered them with a basket weave embossed (We R Memory Keepers embossing folder) kraft piece.  In order to match the greeting to the sky, I ink blended a piece of white card stock.  After making sure it was completely dry, I stamped the words from the Waffle Flower Merry stamp set in Versamark and heat embossed with the gold embossing powder.  As a final touch, I used my clear Wink of Stella marker on each of the windows.

I hope you like it!